Body na spoluautora | Body za publikaci pro MU | Odkaz ISVaV | 1,86 | 16,73 | Mechanical and microwave absorbing properties of carbon-filled polyurethane
|
2,78 | 19,45 | Synthesis of carbon nanotubes and iron oxide nanoparticles in MW plasma torch with Fe(CO)5 in gas feed
|
2,03 | 12,20 | Hydrophylisation of non-woven polypropylene textiles using atmospheric pressure surface barrier discharge
|
3,31 | 16,55 | Homogenization of CZ Si wafers by Tabula Rasa annealing
|
0,00 | 0,00 | Thermodynamic optimization of the Ni-Al-Cr-Co system on the base of experimental phase data
|
8,90 | 53,41 | Surface modification of polyethylene and polypropylene in atmospheric pressure glow discharge
|
0,00 | 0,00 | Thermodynamic Optimization of the Ni-Al-W System
|
0,00 | 0,00 | Microstructure and Phase Equilibria in Ni-Al-Cr-Co Alloys
|
0,00 | 0,00 | Microstructure and phase equilibria in Ni-Al-Cr-Co alloys
|
0,00 | 0,00 | Optimization of Phase Equilibria in the Ni-Al-W System with Respect to New Phase Information
|
0,00 | 0,00 | Mechanické vlastnosti plazmově deponovaných tenkých vrstev na různých substrátech
|
9,33 | 18,66 | Phase Equilibria in the Ni-Al-W System at 900 C
|
0,00 | 0,00 | Phase equilibria in the Ni-Al-Cr-Co system
|
0,67 | 2,01 | Scanning thermal microscopy - theory and applications
|
0,00 | 0,00 | Complex study of the mechanical properties of a-Si:H and a-SiC:H thin films
|
29,06 | 87,18 | Experimental and Theoretical Study of Redistribution of Alloying Elements in Ni-based Weld Joints at High Temperatures
|
0,00 | 0,00 | Determination of phase equilibria in the Ni-Al-W system
|
0,00 | 0,00 | Fázové rovnováhy v systému Ni-Al-Cr-Co
|
0,00 | 0,00 | Effect of Heat-Treatment on the Microstructure, Microhardness and Corrosion of Cast Mg-3Sn-2Ca Alloy
|
0,00 | 0,00 | Deposition and Characterisation of Nanostructured silicon-oxide Containing Diamond-like Carbon Coatings
|
0,00 | 0,00 | Deposition and Characterisation of Nanostructured silicon-oxide Containing Diamond-like Carbon Coatings
|
0,00 | 0,00 | Depth sensing indentation at nano- and microscale
|
11,65 | 46,61 | Complex study of mechanical properties of a-Si : H and a-SiC : H boron doped films
|
0,97 | 6,81 | Influence of Silicon, Oxygen and Nitrogen Upon the Properties of Plasma Deposited Amorphous Diamond-like Carbon Coatings
|
29,06 | 87,18 | Microstructure and Phase Equilibria in Ni-Al-Cr-Co Alloys
|
0,00 | 0,00 | Mechanické vlastnosti nanokrystalických diamantových vrstev
|
0,00 | 0,00 | Mechanical properties of nanocrystaline diamond films
|
11,65 | 46,61 | Mechanical properties of thin silicon films deposited on glass and plastic substrates studied by depth sensing indentation technique
|
0,00 | 0,00 | Mechanical properties of nanostructured composite diamond films prepared by PECVD enhanced by RF induced DC self bias
|
0,00 | 0,00 | Nanocomposite Diamond-Like Carbon Coatings Studied by AEM and Depth Sensing Indentation Test
|
0,00 | 0,00 | Properties of the Carbon Thin Films Deposited by Thermoionic Vacuum Arc
|
13,82 | 41,47 | Microstructure and phase equilibria in the Ni-Al-W system
|
1,19 | 8,30 | Optimisation of mechanical properties of plasma deposited graded multilayer diamond-like carbon coatings
|
11,76 | 47,05 | Comparative Study of Films Deposited from HMDSO/O2 in Continuous Wave and Pulsed rf Discharges
|
9,73 | 19,45 | Characterization by nanoindentation and Scanning Electron Microscopy of the spin valves structuresprepared by Thermionic Vacuum Arc (TVA) method
|
0,00 | 0,00 | Comparative study on several micro and nanoindentation techniques including AFM
|
0,48 | 4,80 | Deposition and Characterization of Nanostructured Silicon-Oxide Containing Diamond-Like Carbon Coatings
|
0,00 | 0,00 | The instrumented indentation test - powerful tool in development of new materials
|
0,00 | 0,00 | Fázové rovnováhy s intermetalickými fázemi v soustavách tranzitivních kovů s hliníkem a niklem
|
3,35 | 13,42 | Characterization of near field optical microscope probes
|
18,37 | 36,75 | Constitution of Ni-Al-Ti system studied by scanning electron microscopy
|
0,00 | 0,00 | Microstructure and Micromechanical Properties of As-cast Mg-Sn-Ca and Mg-Sn-Mn Alloys
|
9,73 | 19,45 | Properties of the carbon thin films deposited by thermionic vacuum arc
|
0,00 | 0,00 | Polyurethane composite with carbon nanotube filler and its properties
|
0,00 | 0,00 | Plasma enhanced CVD of thin films using hexamethyldisiloxane and octamethyltetrasiloxane monomers
|
0,00 | 0,00 | Study of Mechanical Properties of NCD Coatings
|
0,00 | 0,00 | Studium DLC vrstev na plastových substrátech
|
0,00 | 0,00 | Tribological Properties and Characterization of the Nanostructured Carbon Thin Films Deposited by Thermionic Vacuum Arc Technology
|
0,00 | 0,00 | Thermodynamic Analysis of the Ni-Al-Cr-W System
|
0,00 | 0,00 | Study of Phase Equilibria in Ni-Al-Ti-Cr-Co Alloys by Analytical Electron Microscopy
|
0,00 | 0,00 | Study of Local Mechanical Preoperties of Magnesium based Alloys
|
0,00 | 0,00 | Study of DLC Coatings Deposited on Plastic Substrates
|
0,00 | 0,00 | SEM/EBSD Study of Indentation Induced Twinning in HCP Metals
|
0,00 | 0,00 | Selection of Reliable Database for Thermodynamic Description of Ni-Al-Cr-Co-Ti System
|
0,00 | 0,00 | Thermodynamic Optimization of the Ni-Al-W System Based on Experimental Data
|
0,00 | 0,00 | Thermodynamnic Optimization of the Ni-Al-Cr-Co System
|
0,00 | 0,00 | Study od Mechanocal Properties of Diamond-like Crabon and Nanocomposite Diamond Coatings Prepared by Several Different Deposition Techniques
|
0,00 | 0,00 | Study of depth sensing indentation method using well defined standard and multilayer NbN/C-N coatings
|
0,00 | 0,00 | Thermodynamic Optimization of the Ni-Al-W System
|
0,00 | 0,00 | Silicon-oxide Containing Diamond-like Carbon Coatings Prepared Using Plasma Enhanced Chemical Vapor Deposition
|
0,00 | 0,00 | Termodynamická optimalizace soustavy Ni-Al-Cr-Co
|
0,00 | 0,00 | Studium soustavy Ni-Al-W prostřednictvím analytické elektronové mikroskopie
|
0,00 | 0,00 | Analytical electron microscopy of Ni-Al-W alloys
|
0,00 | 0,00 | Analytical Electron Microscopy of Ni-Al-Cr-Co-Ti Alloys
|
Back
(c) Michal Bulant, 2011